0%
EZI METAL TREATMENT is anti friction metal conditioner with over 10 years of successfully establish performance. It works on an entirely different principal than other additives. EZI is a heat activated chemical that uses oils and lubricants to carry itself to points of heat and friction and it is a pure undiluted.
EZI is not an oil but pure concentrated complex chemical produce under high technology and is designed to be carried by existing moto oil, transition oil, gear lube
Oil additives are viscosity improves.
Most oil treatment use some kind of polymer made to ?thicken? the oil. Hence it improves viscosity but do not lessen friction or prevent metal wear.
Some oil additives cause problem such as ?gumming? or leaves hardened deposits. This condition occurs when polymers begin to thicken and harden, which will form solid gummy materials.
Oil additives can cause serious equipment damage if these gummy materials can insinuate and plug oil holes of bearing and piston ring seats.
Oil additives are viscosity improves.
Most oil treatment use some kind of polymer made to “thicken” the oil. Hence it improves viscosity but do not lessen friction or prevent metal wear.
Some oil additives cause problem such as “gumming” or leaves hardened deposits. This condition occurs when polymers begin to thicken and harden, which will form solid gummy materials.
Oil additives can cause serious equipment damage if these gummy materials can insinuate and plug oil holes of bearing and piston ring seats.
EZI super lubricants are heat activated metal treatments that will reduce friction and prevent metal from wear.
The chemical concentrate is designed to blend with motor oil, gear oil, ATF and other lubricants and greases- whether it is made from mineral, semi-synthetic or full synthetic lubricants.
It will provide surprising low friction values, which remains essentially permanent in the treated metal surface.
EZI super lubricants are heat activated metal treatments that will reduce friction and prevent metal from wear.
The chemical concentrate is designed to blend with motor oil, gear oil, ATF and other lubricants and greases- whether it is made from mineral, semi-synthetic or full synthetic lubricants.
It will provide surprising low friction values, which remains essentially permanent in the treated metal surface.
The final report for the project number ME 2255 was revised in response to the letter received from Faisal K. Al-Angary and partner trading Co. dated 3 June 2006. the Main Objective of the study is to investigate that performance effectiveness of adding the product (EZI EXTRA POWERLUBE) on engine oil and compare it with the same oil without adding the product. The study is carried out by: (i) investigating the effect of the product (EZI EXTRA POWER LUBE) on the torque and horsepower output and the fuel consumption of a gasoline engine; and (ii) investigating the effect of the product (EZI EXTRA POWERLUBE) on oil life and engine life of a gasoline engine. Laboratory tests were employed in the study according to standard testing methods, the overall effects of the products EZI EXTRA POWER LUBE when is used in gasoline engine are summarized in the following table
Fuel Consumption
Engine Power Output(HP)
Wear Loss of the Bearings
Engine Lifetime
Average Specific Gravity
Average Flash point
Average Viscosity of the Oil
Average Viscosity index
Engine Oil Lifetime
Engine Oil Consumption
Reduced upto 3.7%
Increase upto 4.8%
Reduction upto 71%
Increase upto 38%
Increase upto 0.66%
Reduction upto 0.80%
Reduction upto 3.5%
Reduction upto 3.7%
Negligible
Reduction upto 29%